Plumbing · Free DIY Guide
How to Fix a Dripping P-Trap Under the Sink
The curved pipe under your sink is held together by slip nuts and washers. Most drips are a loose nut or a worn washer.
Rather have it done right the first time? ProFix crews do this every day on homes and rental turnovers. Call 773-440-2252 or book online.
Tools & materials
- Bucket
- Channel-lock pliers
- Replacement slip washers or a new P-trap kit (1-1/4 or 1-1/2 inch)
- Rag
- Flashlight
Step by step
- Step 1
Put a bucket under the trap. Dry the pipes with a rag, run water and watch to find exactly where the drip starts.
- Step 2
Hand-tighten the slip nut at the leak, then give it a quarter turn more with pliers. Don't over-tighten plastic nuts.
- Step 3
If it still drips, loosen both slip nuts and remove the trap. Dump the water and debris into the bucket.
- Step 4
Replace the beveled slip washers (the bevel faces the joint), or install a new trap kit of the same size.
- Step 5
Reassemble, hand-tighten plus a quarter turn, then run water for a full minute and check with a dry tissue.
When to stop and call ProFix
If you see any of these, stop and call us:
- The leak is coming from the drain pipe in the wall
- The pipe is old metal that's corroded or crumbling
- Water damage has softened the cabinet floor
- The sink drains slowly even after cleaning the trap
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro (Dallas–Fort Worth coming soon), with a written price before work starts.
Related guides
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides
