Tools & materials
- Anti-sag gate kit (cable and turnbuckle)
- Drill/driver
- Exterior screws
- Level
- Wood shim
Step by step
- Step 1
Prop the gate's latch side up with a shim so it's level and closes cleanly.
- Step 2
Tighten or replace hinge screws with longer exterior screws.
- Step 3
Install the anti-sag cable from the top hinge corner diagonally to the bottom latch corner.
- Step 4
Tighten the turnbuckle until the gate holds square, then remove the shim.
- Step 5
Adjust the latch if needed so it catches easily.
When to stop and call ProFix
If you see any of these, stop and call us:
- The hinge post leans or is loose in the ground
- The gate frame is rotted
- It's a metal or automatic gate
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides