Tools & materials
- Curtain rod and brackets
- Tape measure
- Level
- Drill
- Self-drilling or toggle anchors
- Pencil
Step by step
- Step 1
Mount brackets 4–6 inches above the window trim and 3–6 inches out past each side.
- Step 2
Mark one bracket, then use a level to mark the other at the same height.
- Step 3
Check for the header framing above the window. Screw straight into wood where you can.
- Step 4
Use heavy-duty drywall anchors where there's no wood. Skip the plastic anchors in the box.
- Step 5
Add a center bracket for rods over 60 inches wide.
- Step 6
Mount the rod, hang the curtains and check that it stays level.
When to stop and call ProFix
If you see any of these, stop and call us:
- Walls are plaster or concrete
- You're hanging heavy blackout curtains on long spans
- Brackets keep pulling out of the wall
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides