Tools & materials
- Stud finder
- Level
- Drill
- Heavy-duty D-rings or a French cleat
- Toggle bolts or screws rated 2x the mirror weight
- Painter's tape
- Helper
Step by step
- Step 1
Weigh the mirror (step on a scale with and without it) and buy hardware rated for at least twice that weight.
- Step 2
Mark the hanging height with painter's tape. Center mirrors about 57–60 inches from the floor.
- Step 3
Find studs and plan to hit at least one. Use toggle bolts where there is no stud.
- Step 4
For mirrors over 30 lb, install a French cleat: one half on the mirror, one half level on the wall.
- Step 5
Have a helper lift and set the mirror onto the cleat or hooks, then check it's level.
When to stop and call ProFix
If you see any of these, stop and call us:
- The mirror is over 50 lb or very large
- The wall is plaster, brick or tile
- It's going over a bed, crib or sofa where a fall would hurt someone
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides