Tools & materials
- Screwdriver
- Wood toothpicks or golf tees
- Wood glue
- Utility knife
- Replacement hinge if the old one is bent
Step by step
- Step 1
Remove the door and hinges completely and check the hinges for bent arms or broken clips.
- Step 2
For stripped holes, dip 2–3 toothpicks in wood glue, push them into the hole, snap them flush and let the glue set about 30 minutes.
- Step 3
Screw the hinges back onto the door, then hold the door in place and drive the screws into the cabinet frame.
- Step 4
Close the door and check the gaps. Use the hinge adjustment screws to even it up (see our guide on adjusting cabinet doors).
- Step 5
Open and close the door several times to make sure it clears the neighboring doors.
When to stop and call ProFix
If you see any of these, stop and call us:
- The cabinet box or face frame is cracked or water-damaged
- The door is particleboard and the screw area has blown out
- You need to replace hinges across a whole kitchen
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides