Tools & materials
- Replacement doorbell button
- Screwdriver
- Painter's tape
- Wire strippers
- Drill (if new screw holes are needed)
Step by step
- Step 1
Unscrew the old button from the door frame and gently pull it out.
- Step 2
Tape the two thin wires to the wall so they can't slip back into the hole.
- Step 3
Loosen the terminal screws and remove the old button.
- Step 4
Connect the two wires to the new button's terminals (either wire on either screw).
- Step 5
Mount the new button, then press it to test the chime.
When to stop and call ProFix
If you see any of these, stop and call us:
- The chime doesn't ring even with a new button (transformer or chime issue)
- Wires are broken off inside the wall
- You're installing a video doorbell that needs a bigger transformer
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
Electrical · Moderate · 30–45 minHow to Replace a Light Switch or OutletRead the guide →Electrical · Easy · 10 minHow to Reset a Tripped Circuit BreakerRead the guide →Electrical · Moderate · 1–2 hoursHow to Replace a Ceiling Light FixtureRead the guide →
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides