Tools & materials
- Matching drawer slides (same length and mount type)
- Tape measure
- Screwdriver or drill
- Level
- Pencil
Step by step
- Step 1
Pull the drawer out fully and press the release levers to remove it.
- Step 2
Measure the old slide length and check whether it's side-mount, center-mount or undermount.
- Step 3
Unscrew the old slides from the drawer and the cabinet.
- Step 4
Install the cabinet members first, level and at the same height on both sides.
- Step 5
Attach the drawer members, then slide the drawer in and test.
- Step 6
Use the slotted holes to fine-tune before driving the final screws.
When to stop and call ProFix
If you see any of these, stop and call us:
- The drawer box is falling apart
- Cabinet sides are particleboard that won't hold screws
- You want soft-close undermount slides in every drawer
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides