Tools & materials
- Replacement sweep (match the glass thickness: usually 1/4 or 3/8 inch)
- Tape measure
- Hacksaw or fine-tooth scissors
- Rubbing alcohol
Step by step
- Step 1
Pull the old sweep off the bottom of the glass. It usually slides or pries off.
- Step 2
Clean the glass edge with rubbing alcohol.
- Step 3
Measure the door width and cut the new sweep to length.
- Step 4
Slide or press the new sweep onto the glass with the drip rail facing inside the shower.
- Step 5
Close the door and run the shower to check for leaks.
When to stop and call ProFix
If you see any of these, stop and call us:
- The door glass is chipped or the hinges sag
- The shower pan or threshold is cracked
- Water still leaks from the frame or sides
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
Kitchen & Bath · Easy · 15 minHow to Unjam a Garbage DisposalRead the guide →Kitchen & Bath · Easy · 1 hour + 24 hr cureHow to Caulk a BathtubRead the guide →Kitchen & Bath · Easy · 20–30 minHow to Fix a Loose Towel BarRead the guide →
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides