Tools & materials
- New showerhead
- Adjustable wrench or pliers
- Thread seal tape (PTFE)
- Rag
- Old toothbrush
Step by step
- Step 1
Wrap a rag around the old showerhead's connector nut to protect the finish and unscrew it counterclockwise.
- Step 2
Hold the shower arm steady with your other hand so you don't twist it inside the wall.
- Step 3
Clean old tape and mineral buildup off the arm threads with a toothbrush.
- Step 4
Wrap new thread tape clockwise 3–4 times around the threads.
- Step 5
Hand-thread the new showerhead on, then snug it a quarter turn with the wrench and rag.
- Step 6
Turn on the water and check for drips at the connection. Tighten slightly if needed.
When to stop and call ProFix
If you see any of these, stop and call us:
- The shower arm turns or leaks inside the wall
- The arm threads are broken off
- Water pressure is low at every fixture, not just the shower
Not in the mood to DIY? A ProFix pro can handle it for you in Chicago Metro and Dallas–Fort Worth, with a written price before work starts.
Related guides
These guides are general information for simple repairs. You're responsible for your own safety and for following local codes and your lease or HOA rules. When in doubt, stop and call a licensed professional. All DIY guides